HomeShopPowerstar UPSCruise Ship ups Shipboard 3kva PS6003rm2uSMT

Cruise Ship ups Shipboard 3kva PS6003rm2uSMT

Cruise Ship ups Shipboard 3kva PS6003rm2uSMT

Request a quote

DOWNLOAD BROCHURE

Line Interactive type UPS wired for Delta power Shipboard use.

Request a Quote

Description

Powerstar PS6003rm2uSMTPowerstar Inc. -since 1993

New Model replacing the PS6003rm2u. SUA series from APC brand is now obsolete.

 3KVA-2700W Up to 97% efficient under full load now  Energy Star® rated!

Similar runtimes, dimensions & connectors to the previous generation model

Ethernet network card available- Powerchute® software included. Compatible with other APC brand UPS monitoring systems 

New LCD Display panel with Text readout of Status or Alarms  

Cabinet dimensions 86mm x 480mm x683mm 2 rack unit tall for 19″ rack  26.9″ deep

Similar models with different power levels are also available.

PS6075rm2u 500W /750VA

PS6000rm2uSMT 1000W /1500VA  (replace the obsolete SUA1500r2X93)

PS6002rm2uSMT  1980W 2200VA

Line Interactive type UPS wired for Delta power Shipboard use .  Shipboard power on ships is different from land based power.  See our Technical Article on Shipboard power. 

Protect the sailors, use a properly designed UPS onboard to reduce shock hazards. Use on deepwater platforms, cruise ships, drilling rigs. We can also offer Line Isolation transformers to reduce or eliminate shock hazard from a sailor touching an energized wire while standing on a wet metal deck.  Read about shipboard power here.

30G rated Dual pole circuit breaker standard

 High shock rated +100G input circuit breaker available (MIL810f version available)

Ruggedization available if the unit needs to survive constant shock and vibration. We build units to high shock levels for Military use if you need it. (MIL-std-901D-grade A)  These units can be ordered and built to pass MIL-std-901D grade B .

Auto Boost /Trim voltage leveling (AVR) without using Inverter to save your battery life

Varying levels of ruggedization available to meet your needs MIL167 and also line filters for EMI may be added.

Smart UPS tests itself and batteries periodically (normally every 2 weeks)

Auto restart after a full run upon utility restoration

Programmable STARTUP DELAY to reduce initial surge currents on your generator during recovery of AC MAINS (normally set to 0 seconds, can be set up to 60 seconds)

Cold Start capable- Can be used as a remote AC power source in the field

Hot swappable batteries –replace through front panel while unit is online

Output Power Capacity 2700 Watts / 3000 VA

Nominal Output Voltage 120V PS6003rm2uSMT208V PS6003rmT2uSMT, or International PS6003rmi2uSMT model @230V also available

Full Sine wave Output -Output Voltage distortion <5% at full load

Output Frequency (sync to mains) 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal

Transfer Time 2-4 ms.  This is less than ¼ of a cycle- your equipment should handle a 20ms hit.

Crest Factor up to 5: 1

Standard Output Connections Contact us if you require different styles

 (120VAC PS6003rm2uSMT)

(6) NEMA 5-15R       or mil

(2) NEMA 5-20R or mil

208V PS6003rmT2uSMT has (2) L6-20r

230V PS6003rmi2uSMT has (8) IEC 320-C13, & (1) IEC 320-C19 + (3) IEC jumpers

Other output connections optional (Military Spec available, contact us for other connections)

 

 

Input

Nominal Input Voltage std. unit: 120V, 208V: T model,  230V: i model; programmable to 220V or 240V

Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)

Input Connections120Vmodel  NEMA L5-30P

208V has L6-20P on 8 ft. cord

International model PS6003rm2uiXL IEC-320 C20 ,

Schuko CEE 7 / EU1-16P

British BS1363A

Cord Length 8 feet (2.44 meters)

Input voltage range for main operations 82 – 144V , 186-286V i model

Input voltage adjustable range for mains operation 75 – 154V , 151-302V i model

 

Batteries & Runtime

(Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof

Typical recharge time 3 hour(s)

Contact Powerstar for high temperature long life

 batteries available for this unit- our Premium pack doubles the life expectancy of the standard cells to 8-10 years @25°C

Typical Backup Time at Half Load 11.7 minutes (1350 Watts)

Typical Backup Time at Full Load 3.4 minutes (2700 Watts)

Typical Backup Time at 625 Watts= 30 minutes

 

Need longer runtimes? See our similarly sized  PS6003rm2uXL with its larger

Battery pack and option for additional 2u battery  trays.

 Runtimes for other models

PS6075rm2u  5.5 minutes @ 500W, 16 minutes@ 250W, 30 minutes @172W

PS6000rm2u  7.2 minutes@ 1000W, 25.5 minutes@500W, 30 minutes @455W

PS6002rm2u  5.1 minutes@1980W, 15.2minutes@990W, 30minutes@560W

Interface Port(s)

  •        RS-232 via RJ45x/ DB9 adapter using the new Microlink protocol
  •        USB port for connecting a computer & programming
  •       Emergency Power Off dry contacts port included (used for instant UPS shutdown e.g., smoke detector contacts)
  •       1ea.  available SmartSlot™ Interface -accepts SNMP Network card (PS9630) or (PS9631) Environmental monitor SNMP card
  • o   HTTP,HTTPS,IPv4,IPv6,NTP,SMTP,SNMP v1,SNMP v2c,SNMP v3,SSH V1,SSH V2,SSL,TCP/IP,Telnet
  • o   RJ-45 10/100 Base-T
  • o   Radius Authentication
  • o   PS9631 adds temperature and humidity reporting & dry contact closures to remotely manipulate customer supplied relays. Customizable input contacts to monitor external devices with AP9810 adapter
    • ·        Communicate to the UPS with Powerchute™ software- supplied with each unit either via USB, RS232 or SNMP.
    • ·        Emergency Power OFF (EPO) contacts on rear- connect an external low current simple closure switch to disable UPS for Fire or other Emergency.
    • ·        Windows XP™ and above includes native drivers for this UPS. Connect a PC with Windows XP™ or above to USB and Windows will configure itself to work with the UPS for graceful shutdown capability.

 

Control panel

4 LED lamp indicators On LineOn Battery, Replace Battery, and Fault Indicators  and

 I- On /o- Off push button- UPS output control push button. and

Escape, Enter, Up cursor and Down cursor to scroll through Alphanumeric text for reading status and alarms on 2 line front panel LCD display.

Audible Alarm -Alarm when on battery: distinctive low battery alarm: configurable delays

Emergency Power Off (EPO) contacts on rear panel.

Protection

Surge energy rating 120V model 459 Joules; 320j for T model; 320j for i model

Filtering- Full time multi-pole noise filtering

PS6003rm2uSMT Dimensions (T & i are the same)

Maximum Height 3.35 inches (86mm) x Width 17 inches (480mm)

Maximum Depth 26.26 inches (683mm)   -Rack height=2U

Net Weight 98 lbs. (44.3 kg)

Shipping Weight 115 lbs. (52 kg)

Shipping Height 10 inches (245 mm)x Shipping Width 23.5inches (596 mm)x Shipping Depth 34.7 inches (869 mm)  -8 units per pallet (855Lb per pallet)

Color- Gun Metal Black

Mounting rail kit included for 4 post rack mounting

 

Operating Environment

* 32 – 104 °F (0 – 40 °C)  (battery dependent) We have a Premium battery option to extend this to -15°C to +50°C charge rating and -25 to +60 °C discharge rating

Operating Relative Humidity 0 – 95%  optional: Conformal coatings are available

Operating Elevation 0-10000 feet (0-3000 meters)

Storage Temperature 5 – 113 °F (-15 – 45 °C)

Storage Relative Humidity 0 – 95%

Storage Elevation 0-50000 feet (0-15000 meters)

Audible noise at 1 meter from surface of unit 55.00 dBA

Online Thermal Dissipation: 375 BTU /hr

Regulatory Approvals Conformance

PS6003rm2uSMT BSMI,CSA,EN 50091-2,EN 55022 Class A,FCC Part 15 Class A,NOM,TUV,UL 1778,VCCI Class A,  ROHS exemption 7B

PS6003irm2uSMT C-tick,CE,EN 50091-1,EN 50091-2,GOST,VDE

Motherboard manufactured in ISO 9001:2008 factories

 Powerstar Inc. Gaithersburg, MD Made in USA.